Step by Step
The steps below are for a flake floor, our most common system.
- 01
Estimate
We visit, talk through how you use the space, measure, show samples and give you a price.
- 02
Surface Prep
We diamond-grind the slab to remove weak surface material and open the concrete so the coating bonds.
- 03
Repairs
Cracks, pits and damaged edges are repaired, and old paint and stains are ground away.
- 04
Coating
The base coat goes down, then your flake blend is broadcast for full coverage.
- 05
Topcoat & Care
A clear topcoat seals the floor, we walk it with you, and you get cure and care instructions.
Surface Preparation Is Everything
Most coating failures come from bad prep, not bad product. Here's what we do differently.
Diamond Grinding
Grinding opens the pores of the concrete so the coating bonds into it. Acid etching and rolling paint onto bare concrete can't match that bond.
Old Coatings Removed
Old paint, failed coatings and glue are ground off. Coating over them means the new floor fails with them.
Cracks Repaired
Cracks and pits are filled and ground flush, so they don't telegraph through the finished floor.
What Should Your Installer Ask?
A good installer asks before recommending a floor. We'll ask:
- How will the space be used every day?
- How much sun, water, traffic or chemicals will it see?
- What condition is the concrete in now?
- How much texture and upkeep do you want?
- When do you need the space back?
Start With a Free Estimate
Takes under a minute. No pressure, no obligation.
- 1Tell us about your space and we'll call you back.
- 2We come out, measure, show you samples, and quote on the spot.
- 3Pick your blend. Flake floors go down in one day.
10-Year Limited Warranty
Every flake floor we install comes with our 10-year limited warranty. We're fully insured on every job and have been coating South Florida concrete for more than six years.
How long does an install take?+
Most flake floors are finished in one day. Metallic and larger commercial floors take longer.
Do I need to be home?+
Someone needs to let us in and walk the floor with us at the end. You don't need to be there all day.
Is it noisy?+
Grinding is loud for part of the day. We keep the work area as tidy as we can and clean up when we finish.
When can I use the floor?+
You can usually walk on a flake floor the next day. We'll tell you when vehicles and furniture can go back.
How do I care for it?+
Sweep and mop with a mild cleaner. No waxing or yearly resealing.
Your New Floor Is One Day Away
Free estimate. No obligation.
